The "old" ZIMO Decoders (no longer in Production) 
 
Overview of current decoders           
 

MX620

Miniature decoder

MX63

H0 decoder

MX64  

H0 decoder

MX64H

High power decoder

MX64V

Low voltage
lamps dec.

MX64D

  21 pin

MX64DV

21-pin low volt. lamps

MX69, MX690

Large scale (scale) decoder

MX69..E.., MX690..E..

Large scale decoders with enhancements

MX82,   MX680

Accessory     Function

MX 64
H0 decoder
(also smaller 0 - scale Locos)

26 x 16 x 3 mm

ZIMO decoder - more Info:

 

Signal controlled Speed Influence

Accessories
for decoders MX62 - MX64
Common 
Specifications  
for all MX64 types		 Total decoder output 1.2 A, motor output up to 1.0 A,  
4 function outputs (0.5 A total),  
4 additional logic level output,
RailCom (bi-directional communication),
"SUSI" interface (soldering pads).
MX64 with 9 highly flexible wires 4.72"  (120 mm) 
2 x pick up, 2 x motor, 2 x headlights, 2 x functions, 1 x common supply
MX64R with "medium" 8 pin connector according to NEM 652 and
NMRA RP 9.1.1.  
Length of wires between decoder and connector: 2.75" (70 mm).
MX64F with "small" 6 pin connector according to NEM 651 and NMRA RP 9.1.1.  
Length of wires between decoder and connector: 2.75" (70 mm).
MX64T

with 21 pin connector, wires from decoder to connector board 70 mm, used for locos from Trix, Liliput, Brawa, etc.

Note: a special type with integrated connector (without cable) is planned for 2007 and will replace the MX64T !
Mamual
MX620, MX63, MX64
(incl. CV list)
 

MX 64H
H0 decoder
(also 0 - scale  and smaller 2m - scale Locos)

26 x 16 x 5 mm
Common 
Specifications  
for all MX64H types
(High output MX64)		 Total decoder output 1.8 A, motor output up to 1.8 A,
8 function outputs in two groups, max. output per group 0.5 A,
RailCom (bi-directional communication),
"SUSI" interface (standardized JST plug).
MX64H with 9 highly flexible wires 4.72"  (120 mm) 
2 x pick up, 2 x motor, 2 x headlights, 2 x functions, 1 x common supply
MX64HR with "medium" 8 pin connector according to NEM 652 and
NMRA  RP 9.1.1.  
Length of wires between decoder and connector: 2.75" (70 mm).
MX64HF with "small" 6 pin connector according to NEM 651 and NMRA RP 9.1.1.  
Length of wires between decoder and connector: 2.75" (70 mm).

MX 64V
H0 decoder
(also 0 - scale  and smaller 2m - scale Locos)
Common 
Specifications  
for all MX64V types 		Total decoder output 1.8 A, motor output up to 1.8 A,
8 function outputs in two groups, max. output per group 0.5 A,
RailCom (bi-directional communication),
"SUSI" interface (standardized JST plug).
MX64V1 integrated 1,2V power supply for bulbs
MX64V5 integrated 5V power supply for bulbs